62
W
EB
C
ON
FI
GUR
A
TOR
The following table lists the fields in this screen.
Table 34: NAT Settings Screen
Field
Description
Address Mapping List
This feature allows you to add computers on the same LAN or network to a public IP so
that it can be accessed remotely. All outgoing traffic from those computers will be
associated with the public IP address. Traffic sent to the Public IP address will be
forwarded to a specific computer that uses a set private IP address
No.
This field displays the Address Mapping List that
enabled to the rule. Click this hyper-link to edit this
Address Mapping entry.
WAN IP This field displays the WAN IP address to map to the
following
LAN IP
address.
LAN IP
This field displays the address of the destination
computer on the BOSST101 LAN to map the
WAN IP
address.
Select
Click this checkbox next to an entry or entries you
want to remove or add. Now click
Delete
to complete
removal.
Add
Click this button to add a new entry to the
Address
Mapping List
.
Delete
Click the
Select
checkbox next to any entry you wish
to remove. Now click this button to remove that entry.
Port Triggering List
Packets arriving at a particular IP address/port are translated and redirected to a
different IP address or port. This is to create a persistent passage through NAT allowing
hosts behind BOSST101 to provide services requiring a static host (i.e. static IP address).
Port triggering is only necessary for incoming connections and not returning traffic.
No.
This field displays the Port Triggering List that
enabled to the rule. Click this hyper-link to edit this
Port Triggering entry.
Service Type This field displays the method of network transport for
this service.
Source Port
This field displays the port to hold open on
BOSST101 for this service.
Only one port per service per host can be used for
port triggering.
Target Port This field displays the port to use on the destination
host.
Target IP This field displays the IP address of the destination
host.
Select
Click this checkbox next to an entry or entries you
want to remove or add. Now click
Delete
to complete
removal.
Add
Click this button to add a new entry to the
Port
Mapping List
.
Delete
Click the
Select
checkbox next to any entry you wish
to remove. Now click this button to remove that entry.
