Bosslan BOSST101 Manual Download

Page: 35 / 84

ON
FI

GUR

TOR

Edit PSTN Trunk Data

Left click the ID hyperlink to enter the

Edit Trunk (PSTN)

screen in

order to configure the desired trunk.

The following table describes the fields in the

Edit Trunk (PSTN)

screen.

Table 13: Edit Trunk (PSTN) Screen

Field

Description

Edit Trunk (PSTN)

ID This field displays the system assigned identifier for

this trunk.

Group No.

This field is only available if the

Mode

field is set to

Dial In/Out/ Dial In Only/ Dial Out Only/ DID

Assign a group number to this trunk between

and

Type

This field is only available if the

Mode

field is set to

Dial In/Out/ Dial In Only/ Dial Out Only/ DID

This field displays the trunk type.

Mode

This mode defines the way in which calls are

answered for this trunk. Use the combo box to select

from the following methods.

•

Shutdown: If not in use, then please shut down

this trunk.

•

Dial In/Out: Accepts both incoming and outgoing

calls.

•

Dial In Only: Accepts incoming calls only.

•

Dial Out Only: Accepts outgoing calls only.

•

DID (Direct Inward Dialing): Call the desired

extension bypassing the Auto Attendant.

Extension Number

This field is only visible if

DID (Direct Inward Dialing)

is selected in the

Mode

field. Select an available

extension to call.

Multi Auto Attendants

This field is only available if the

Mode

field is set to

Dial In/Out/ Dial In Only

Enable this field to configure Auto Attendants for this

trunk that differs from the attendants set on the

PBX

Global Configuration on page 26

For more details on setting Auto Attendants, please

see

Auto Attendants on page 40

Summary of Contents for BOSST101





















































































Search results

Summary of Contents for BOSST101

Reviews:

Related manuals for BOSST101

Brands by name

Popular brands

Bosslan BOSST101, Manual

Search results

Summary of Contents for BOSST101

Reviews:

Related manuals for BOSST101

Brands by name

Popular brands