Bosslan BOSST101 Manual Download

Page: 31 / 84

ON
FI

GUR

TOR

Table 10: SIP Global Configuration Screen

Expire Time Type the number of seconds to elapse before the SIP

phone needs to register again.

RTP Port

The Real Time Packet port data is the port used to

transmit the voice stream in a timely manner.

Enter port numbers between 8000 and 65535. The

default setting for this field is 10000 (recommended).

RFC2833 Payload Type

This field describes the format of data packets. Valid

payload types are between 96 and 128.

This field is set to 101 by default.

Under NAT Select

Yes

if BOSST101 is behind NAT. This will

enable

NAT traversal for all VoIP calls.

Signaling Precedence(ToS)

This field defines the ToS for call control signals

(control packets).

Type of Service (ToS) is a method to prioritize

network traffic. This tagging method that classifies

and prioritizes packets. When packets are sent out on

the network, the higher priority packets are

transferred first.

There are six priority levels available:

•

0 Routing

•

1 Priority

•

2 Immediate

•

3 Flash

•

4 Flash Override

•

5 CRITIC/ECP

Voice Precedence(ToS)

This field defines the ToS for voice signals (data

packets). For information regarding Tos, please see

the previous field.

G.711 Packet Size This field defines the packet size using the G.711

codec, ranging from 20 to 80.

G.729 Packet Size This field defines the packet size using the G.729

codec, ranging from 20 to 80.

G.723 Packet Size This field defines the packet size using the G.723

codec, ranging from 30 to 180.

Domain Name

Type the domain name to identify your BOSST101

SIP server to SIP enabled devices on the network.

You can also enter an IP address in this field.

DTMF Type

SIP can send DTMF signals during calls. This

enables services like telephone menus. Your

BOSST101 can perform this using one of the

following three methods:

•

RFC2833: Send the tones out of band but still

attached to the audio stream via RTP.

•

SIP Info: Transmits DTMF tones out-of-band as

telephone-events in a reliable manner
independent of the audio stream.

•

Nortel Info: A proprietary signalling protocol

supporting Nortel proprietary SIP info signalling
protocol.

Summary of Contents for BOSST101





















































































Search results

Summary of Contents for BOSST101

Reviews:

Related manuals for BOSST101

Brands by name

Popular brands

Bosslan BOSST101, Manual

Search results

Summary of Contents for BOSST101

Reviews:

Related manuals for BOSST101

Brands by name

Popular brands