Boss JamStation JS-5 Owner'S Manual Download Page 17

Page: 17 / 160

Getting Ready to Play

Quick Start

Connect the included AC adapter to the JS-5, then plug the

AC adapter into a power outlet.

* To prevent the inadvertent disruption of power to your unit (should the plug be

pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack,
anchor the power cord using the cord hook, as shown in the illustration.

fig.QS01-01b

Connect the amp or audio set as shown in the figure.

If necessary, connect stereo headphones.

* To get the best performance out of the JS-5, we recommend stereo use.

For monaural use, make the connection to the OUTPUT L (MONO) jack.

■

For making connections to the MIDI connectors, see (p. 131).

■

For making a connection to the FOOT SW jack, see (p. 117).

Summary of Contents for JamStation JS-5

































































































































































Search results

Summary of Contents for JamStation JS-5

Reviews:

Related manuals for JamStation JS-5

Brands by name

Popular brands

Boss JamStation JS-5, Owner'S Manual

Search results

Summary of Contents for JamStation JS-5

Reviews:

Related manuals for JamStation JS-5

Brands by name

Popular brands