Boss JamStation JS-5 Owner'S Manual Download Page 114

Page: 114 / 160

114

Chapter 9 Recording Your Own Performances

fig.RE09-10

Use [CURSOR] and [VALUE] to set the starting and
final measures of the range to be rerecorded.

* You cannot set the starting measure for rerecording at an

earlier point than the starting measure of the performance (the
measure indicated in the left display).

* By pressing [FWD] [RWD] or [RESET] you can change the

measure at which the playback will begin. However, it is not
possible to set this later than the recording start measure.

Press [START].

Since the measures specified in Step 4 already contain
audio data, you first move to the audio data delete
screen.

A confirmation screen appears, asking if it is all right to
erase the audio data in the specified range.

* If you have used the foot switch to start, the audio data in the

specified range will be automatically erased and the Record
Standby screen will appear.

* To cancel, press [EXIT].

fig.RE09-12

Press [ENTER] to erase the data.

The audio data is erased, and the Record Standby screen
appears.

fig.RE09-13

Press [RWD], [FWD], and [RESET] as needed to set the
starting measure for the performance.

* The starting measure for the performance cannot be set at a

point later than the starting measure for recording.

Press [START] and recording begins.

When the count-in is selected, the count-in is indicated in
the left display while the count sound plays
simultaneously.

After the count-in is displayed, recording begins.

fig.RE09-50

The previously recorded performance is played back.
By playing along with these sounds, the new recording
is made only in the specified range.

Once you have finished recording, press [STOP].

[REC] goes dark, and the Song screen reappears.

If you wish to erase only a portion of the audio data, perform
steps 1–6 for rerecording and then press [STOP].

Deleting the Recorded Data

Use the following procedure to delete all audio data in the
currently selected User Song.

At the Song screen, press [ERASE] ([SHIFT] +
[UTILITY]).

The Delete screen for Song appears.

fig.QS05-07

Turn [VALUE] to select “AUDIO.”

fig.QS05-40

Starting measure

Final measure

When the range to be rerecorded exceeds the number of
measures available for recording, the following screen
appears.

fig.RE09-40

In this case, use [CURSOR] and [VALUE] to bring up the
Record Standby screen, then alter the starting and
ending measures of the segment to be rerecorded.

* If you do not want to change the range of measures to be

rerecorded, you can delete audio data recorded in another
song, thus increasing the number of measures available
for recording.

Data to be deleted

Summary of Contents for JamStation JS-5

































































































































































Search results

Summary of Contents for JamStation JS-5

Reviews:

Related manuals for JamStation JS-5

Brands by name

Popular brands

Boss JamStation JS-5, Owner'S Manual

Search results

Summary of Contents for JamStation JS-5

Reviews:

Related manuals for JamStation JS-5

Brands by name

Popular brands