Bosch WBE 4510, Original Instructions Manual

Page: 38 / 363

1 695 655 163 2010-07-17
|
Robert Bosch GmbH
38 | WBE 4510 | User information en
3.5 WBE 4510
651025-02 _Sr
15
16
14
13
1
2
6
5
12
11
17
7
4
8
9
10
3
20
21
19
18
Fig. 1: WBE 4510
Item Designation Function/purpose
1 TFT monitor Software display
2 Wheel guard Protection of operator against flying particles (e.g. dirt, water).
Starting and stopping measurement.
3 Wheel lift operating unit Control of wheel lift.
4 Wheel lift slide Lifting device; provides assistance on attaching and removing the wheel.
5 Vernier caliper
(electronic) Recording of rim distance and rim diameter.
Determination of positions for attachment of adhesive weights.
6 Laser Recording of rim width, true-running and tire geometry.
7 Clamping tool holders Storage of cones and quick-action clamping nut.
8 Safety device Safety feature
9 Wheel holder Securing of wheel on wheel lift slide to prevent tipping.
10 Cone of drive shaft Flange mounting
11 Right pedal Locking of shaft / wheel.
12 Left pedal Transfer of rim data (optional, see chapter 8.4.2).
13 Operating unit with function keys Operation of WBE 4510 via function keys, refer to Section 7.
14 Tray Storage of balance weights and tools.
15 On/off switch Switching WBE 4510 on and off.
16 Mains socket Connection for power cord.
17 Service unit with compressed air con-
nection Checking/adjustment of operating pressure.
Removal of dirt.
Oil supply for compressed air system.
18 Centering flange Wheel attachment.
19 Quick-action clamping nut Centering and attachment of wheel on cone
20 Manual vernier caliper Can be used as substitute if the vernier caliper (electronic) is defective.
21 Measuring compasses Can be used as substitute if the rim width and rim diameter cannot be recorded
with the vernier caliper (electronic)/laser.