VideoJet XF E
Configuration using a Web browser | en
31
Bosch Sicherheitssysteme GmbH
Installation and Operating Manual
DOC | V5.51 | 2012.03
–
MODEM
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
–
GSM
For GSM connections at 9,600 baud, resolution 352 × 288/240 pixels
5.7
Basic Mode: Audio
You can set the gain of the audio signals to suit your specific requirements. Your changes are
effective immediately.
If you connect via Web browser, you must activate the audio transmission on the
LIVEPAGE
Functions
page. For other connections, the transmission depends on the audio settings of the
respective system.
Further topics:
–
Section 5.15 Advanced Mode: LIVEPAGE Functions, page 38
Audio
The audio signals are sent in a separate data stream parallel to the video data, and so increase
the network load. The audio data are encoded according to the selected format and require
additional bandwidth. If you do not want any audio data to be transmitted, select
Off
.
Line In 1 / Line In 2
You can set the gain for the line inputs. Make sure that the display does not go beyond the
green zone during modulation.
Line Out
You can set the line output gain.
5.8
Basic Mode: Recording
You can record the images from the camera connected to the VideoJet XF E on the local
CompactFlash card. CompactFlash cards are the ideal solution for shorter storage times. Here
you can start or stop the recording.
Summary of Contents for VJT-X20XF-E
Page 1: ...VideoJet XF E VJT X20XF E VJT X40XF E en Installation and Operating Manual ...
Page 2: ......
Page 123: ......