Bosch VJT-X20XF-E Installation And Operating Manual Download

Page: 53 / 124

VideoJet XF E

Configuration using a Web browser | en

Bosch Sicherheitssysteme GmbH

Installation and Operating Manual

DOC | V5.51 | 2012.03

5.26

Advanced Mode: Recording Profiles

You can define up to ten different recording profiles. You will then use these recording

profiles in the recording scheduler, where they are linked with the individual days and times.

Further topics:

–

Section 5.28 Advanced Mode: Recording Scheduler, page 57

Click one of the tabs to edit the corresponding profile.

In the table, click the name of the camera input for which you want to edit the settings.

You can select multiple camera inputs by holding down the shift or [Ctrl] key as usual in

Windows. The following settings apply to all selected entries.

If necessary, click the

Default

button to return all settings to their default values.

NOTICE!

You can change or add to the recording profile description on the tabs on the

Recording

Scheduler

page.

Summary of Contents for VJT-X20XF-E





























































































































Search results

Summary of Contents for VJT-X20XF-E

Reviews:

Related manuals for VJT-X20XF-E

Brands by name

Popular brands

Bosch VJT-X20XF-E, Installation And Operating Manual

Search results

Summary of Contents for VJT-X20XF-E

Reviews:

Related manuals for VJT-X20XF-E

Brands by name

Popular brands