Bosch VJT-X20XF-E, Installation And Operating Manual

Page: 27 / 124

VideoJet XF E Configuration using a Web browser | en 27
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V5.51 | 2012.03
5.3 Basic Mode: Device Access
Device name
You can give the VideoJet XF E a name to make it easier to identify. The name makes the task
of administering multiple units in larger video monitoring systems easier, for example using
the Bosch Video Client or Bosch Video Management System programs.
The device name is used for the remote identification of a unit, in the event of an alarm for
example. For this reason, enter a name that makes it as easy as possible to quickly identify the
location.
Camera 1 to Camera 4
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so. The camera
name makes the task of administering cameras in larger video monitoring systems easier, for
example using the Bosch Video Client or Bosch Video Management System programs.
Enter unique, unambiguous names for each camera in these fields.
Further topics:
– Section Camera name stamping, page 36
CAUTION!
Do not use any special characters, for example & , in the name.
Special characters are not supported by the system's internal management.
CAUTION!
Do not use any special characters, for example & , in the name.
Special characters are not supported by the system's internal management.