Bosch VIDEOJET X20 Installation And Operating Manual Download

Page: 7 / 130

VideoJet X20

Preface | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

Preface

1.1

About this Manual

This manual is intended for persons responsible for the installation and operation of the

VideoJet X20. International, national and any regional electrical engineering regulations must

be followed at all times. Relevant knowledge of network technology is required. The manual

describes the installation and operation of the unit.

1.2

Conventions in this Manual

In this manual, the following symbols and notations are used to draw attention to special

situations:

1.3

Intended Use

The VideoJet X20 network video server transfers video, audio and control signals over data

networks (Ethernet LAN, Internet). There are various memory options for recording the

images captured by the connected camera. The unit is intended for use with CCTV systems.

Various functions can be triggered automatically by incorporating external alarm sensors.

Other applications are not permitted.

In the event of questions concerning the use of the unit which are not answered in this

manual, please contact your sales partner or:

Bosch Security Systems

Robert-Koch-Straße 100

85521 Ottobrunn

Germany

www.boschsecurity.com

CAUTION!

This symbol indicates that failure to follow the safety instructions described may endanger

persons and cause damage to the unit or other equipment.

It is associated with immediate, direct hazards.

NOTICE!

This symbol refers to features and indicates tips and information for easier, more convenient

use of the unit.

Summary of Contents for VIDEOJET X20



































































































































Search results

Summary of Contents for VIDEOJET X20

Reviews:

Related manuals for VIDEOJET X20

Brands by name

Popular brands

Bosch VIDEOJET X20, Installation And Operating Manual

Search results

Summary of Contents for VIDEOJET X20

Reviews:

Related manuals for VIDEOJET X20

Brands by name

Popular brands