104
en | Operation
VideoJet X20
DOC | V4.0 | 2009.06
Installation and Operating Manual
Bosch Security Systems
Connecting with a Terminal Program
Various requirements must be met in order to operate with a terminal program (see
Section 8.9 Communication with Terminal Program, page 116
).
1.
Start the terminal program and enter the command
1
in the main menu to switch to the
IP
menu.
2.
Enter the command
4
in the
IP
menu to change the remote IP address, then enter the IP
address of the unit you wish to connect to.
3.
Enter the command
0
to return to the main menu and then enter the command
4
to
switch to the
Rcp+
menu.
4.
In the
Rcp+
menu, enter the command
5
to activate the automatic connection.
Closing the Connection with a Terminal Program
1.
Start the terminal program and enter the command
4
in the main menu to switch to the
Rcp+
menu.
2.
In the
Rcp+
menu, enter the command
5
to deactivate the automatic connection.
Summary of Contents for VIDEOJET X20
Page 1: ...VideoJet X20 Network Video Server en Installation and Operating Manual ...
Page 2: ...VideoJet X20 ...
Page 129: ......
