Bosch VIDEOJET X20 Installation And Operating Manual Download

Page: 29 / 130

VideoJet X20

Configuration Using a Web Browser | en

Bosch Security Systems

Installation and Operating Manual

DOC | V4.0 | 2009.06

Protected VideoJet X20

If the VideoJet X20 is password protected against unauthorized access, the Web browser

displays a corresponding message and prompts you to enter the password when you attempt

to access protected areas.

Enter the user name and associated password in the corresponding text fields.

Click

. If the password is entered correctly, the Web browser displays the page that

was called up.

Protected Network

If a RADIUS server is employed in the network for managing access rights (802.1x

authentication), the VideoJet X20 must be configured accordingly, otherwise no

communication is possible.

To configure the unit, you must connect the VideoJet X20 directly to a computer using a

network cable. This is because communication via the network is not enabled until the

Identity

and

Password

parameters have been set and successfully authenticated (see

Section Authentication, page 84

5.2

Configuration Menu

The

SETTINGS

page provides access to the configuration menu, which contains all the unit's

parameters arranged in groups. You can view the current settings by opening one of the

configuration screens. You can change the settings by entering new values or by selecting a

predefined value from a list field.

There are two options for configuring the unit or checking the current settings:

–

Basic mode

–

Advanced mode

Basic Mode

the most important parameters are arranged in seven groups. This allows you

to change the basic settings with just a few entries and then put the device into operation.

Advanced Mode

is recommended for expert users or system support personnel. You can

access all unit parameters in this mode. Settings that affect the fundamental functionality of

the unit (such as firmware updates) can only be altered in the advanced mode.

All parameter groups are described in this chapter in the order in which they are listed in the

configuration menu, from the top of the screen to the bottom.

All settings are backed up in the VideoJet X20 memory so they are not lost even if the power

fails.

NOTICE!

The VideoJet X20 offers the option to limit the extent of access using various authorization

levels (see

Section 5.11 Advanced Mode: Password, page 39

CAUTION!

The settings in the advanced mode should only be processed or modified by expert users or

system support personnel.

Summary of Contents for VIDEOJET X20



































































































































Search results

Summary of Contents for VIDEOJET X20

Reviews:

Related manuals for VIDEOJET X20

Brands by name

Popular brands

Bosch VIDEOJET X20, Installation And Operating Manual

Search results

Summary of Contents for VIDEOJET X20

Reviews:

Related manuals for VIDEOJET X20

Brands by name

Popular brands