VideoJet X20
Configuration Using a Web Browser | en
57
Bosch Security Systems
Installation and Operating Manual
DOC | V4.0 | 2009.06
6.
For each profile, click the
Set
button to save the settings in the unit.
Standard recording
Here you can select the mode for standard recordings.
If you select
Continuous
, the recording proceeds continuously. If the maximum memory
capacity is reached, older recordings will automatically be overwritten. If you select the
Pre-
alarm
option, recording will only take place in the pre-alarm time, during the alarm and during
the set post-alarm time.
If you select
Off
, no automatic recording takes place.
Standard profile
From this field, you can select the encoder profile to be used for recording (see
Section 5.19 Advanced Mode: Encoder Profile, page 48
).
Pre-alarm time
You can select the required pre-alarm time from the list field.
Post-alarm time
You can select the required post-alarm time from the list field.
Post-alarm profile
You can select the encoder profile to be used for recording during the post-alarm time (see
Section 5.19 Advanced Mode: Encoder Profile, page 48
).
The
Standard profile
option adopts the selection at the top of the page.
Alarm input / Motion alarm / Video loss alarm
Here you can select the alarm sensor that is to trigger a recording. You can also use the
motion and video loss alarm for a camera to trigger the alarm recording by another camera.
Virtual alarm
Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+
commands or alarm scripts, for example.
!
CAUTION!
You can specify limitations for overwriting older recordings in
Continuous
mode by
configuring the retention time (see
Section 5.24 Advanced Mode: Retention Time, page 58
).
i
NOTICE!
The recording profile can deviate from the standard setting
Active profile
for the video input
set and is only used during an active recording.
i
NOTICE!
The motion alarms are configured and activated for each camera on the
VCA
page (see
Section 5.31 Advanced Mode: VCA Event Triggered, page 72
).
The alarm inputs are configured and activated on the
Alarm Inputs
page (see
Section 5.35 Advanced Mode: Alarm Inputs, page 77
).
The numbering of the checkboxes for the alarm inputs corresponds to the labeling of the
alarm inputs on the VideoJet X20. The motion and video loss alarm corresponds to the
labeling on the video inputs.
i
NOTICE!
For more information, please see the
Alarm Task Script Language
document and the RCP+
documentation. These documents can be found on the product CD supplied.
Summary of Contents for VIDEOJET X20
Page 1: ...VideoJet X20 Network Video Server en Installation and Operating Manual ...
Page 2: ...VideoJet X20 ...
Page 129: ......
