Bosch VIDEOJET X20 Installation And Operating Manual Download

Page: 24 / 130

en | Installation

VideoJet X20

DOC | V4.0 | 2009.06

Installation and Operating Manual

Bosch Security Systems

4.4

Power On/Power Off

Power Supply

The VideoJet X20 does not have a power switch. Power is supplied via a separate unit.

Connect the VideoJet X20 to the power supply unit and plug this into the mains. The unit is

now ready for use. The VideoJet X20 does not come supplied with a power supply unit.

Plug the terminal block with the PSU cable connected to it into the orange socket on the

VideoJet X20.

Connect the power supply unit to the mains. The VideoJet X20 is ready for use as soon as

the

Connect

LED changes from a red light, indicating the start-up procedure, to a green

light.

If the network connection has been set up correctly, the yellow

ETH 1

ETH 2

LED will also

light up. A flashing

ETH 1

ETH 2

LED signals that data packages are being transmitted over

the network.

4.5

Setup Using the Configuration Manager

The

Configuration Manager

program can be found on the product CD contained in the scope

of delivery. This program allows you to implement and set up new video servers in the

network quickly and conveniently.

Installing the Program

Insert the CD into the computer's CD-ROM drive.

If the CD does not start automatically, open the

Configuration Manager

directory using

Windows Explorer and double-click

Setup.exe

Follow the on-screen instructions.

CAUTION!

Use only power supply units with UL approval and a power output according to LPS or

NEC Class 2.

Where necessary, use suitable equipment to ensure that the power supply is free from

interference such as voltage surges, spikes or voltage drops.

Do not connect the VideoJet X20 to the power supply until all other connections have been

made.

NOTICE!

Using the Configuration Manager to set all parameters in the VideoJet X20 is an alternative to

configuration by means of a Web browser, as described in chapter 5 of this manual.

Summary of Contents for VIDEOJET X20



































































































































Search results

Summary of Contents for VIDEOJET X20

Reviews:

Related manuals for VIDEOJET X20

Brands by name

Popular brands

Bosch VIDEOJET X20, Installation And Operating Manual

Search results

Summary of Contents for VIDEOJET X20

Reviews:

Related manuals for VIDEOJET X20

Brands by name

Popular brands