Bosch VIDEOJET X20, Installation And Operating Manual

Page: 38 / 130

38 en | Configuration Using a Web Browser VideoJet X20
DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
You can use the second line for entering additional characters; these can be selected from a
table.
1. Click the icon next to the second line. A new window with the character map is opened.
2. Click the required character. The character is inserted into the Result field.
3. In the character map, click the << and >> icons to move between the different pages of
the table, or select a page from the list field.
4. Click the < icon to the right of the Result field to delete the last character, or click the X
icon to delete all characters.
5. Now click the OK button to apply the selected characters to the second line of the
Camera 1 parameters. The window will close.
Initiator extension
You can attach your own text to the initiator name of the VideoJet X20 to make the unit easier
to identify in large iSCSI systems. This text is added to the initiator name, separated from it by
a full stop. You can see the initiator name in the system overview (see Section 5.9 Basic Mode:
System Overview, page 36 ).
!
CAUTION!
Do not use any special characters, for example & , in the name.
Special characters are not supported by the system's internal recording management and may
therefore result in the Player or Archive Player being unable to play back the recording.