VideoJet X20
Operation | en
97
Bosch Security Systems
Installation and Operating Manual
DOC | V4.0 | 2009.06
System Log / Event Log
The
System Log
field contains information about the operating status of the VideoJet X20 and
the connection. You can save these messages automatically in a file (see
Section 5.15 Advanced Mode: LIVEPAGE Functions, page 44
).
Events such as the triggering or end of alarms are shown in the
Event Log
field. You can save
these messages automatically in a file (see
Section 5.15 Advanced Mode: LIVEPAGE Functions,
page 44
).
1.
If you want to delete the entries, click the delete icon in the top right-hand corner of the
relevant field.
2.
If you want to view a detailed log, click the icon in the top right-hand corner of the
relevant field. A new window will open.
Audio Function
Depending on the configuration, the VideoJet X20 can send and receive audio signals. All
users who are connected by browsers receive the audio signals sent by the VideoJet X20.
Audio signals can only be sent to the VideoJet X20 by the user who connects to the unit first.
1.
On the
LIVEPAGE
, click anywhere next to the video image to remove the focus from the
ActiveX.
2.
Hold down the
F12
key to make a voice connection to the VideoJet X20. The browser's
status bar displays the message
Send Audio ON
.
3.
Release the
F12
key when you want to stop sending audio signals to the VideoJet X20.
The status bar in Internet Explorer displays the message
Send Audio OFF
.
i
NOTICE!
When the connection maintaining voice contact with the VideoJet X20 is broken, the next user
to make a connection to the VideoJet X20 can send audio data to the VideoJet X20.
Summary of Contents for VIDEOJET X20
Page 1: ...VideoJet X20 Network Video Server en Installation and Operating Manual ...
Page 2: ...VideoJet X20 ...
Page 129: ......
