10.2.3
Basic HMI software functions
Editing parameters
Often, it is necessary to change parameters which are presented in the form
of a table.
Fig. 10-6:
Example table (NC variables list)
The values are always edited as follows:
1. Place the focus on the value to be edited using the cursor keys (▲, ►, ▼,
◄)
2. Switch to edit mode by pressing the <Enter> key
3. Enter or change the value
4. Apply the value with <Enter>. Edit mode is exited automatically
If tables extend beyond the screen page shown, use the <Page
▲> and <Page ▼> keys to move to the desired page of the table.
Text editor
The text editor is used to create, edit and save ASCII text files and, above all,
NC programs.
Fig. 10-7:
Text editor
DOK-MTXMIC-EASY*******-CO06-EN-P
Bosch Rexroth AG
137/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Operating the IndraMotion MTX micro
