10.2
HMI software
10.2.1
General information
The IndraMotion MTX micro is delivered along with HMI software that has
been adjusted to the operation of turning or milling machines. Depending on
the basic project selected, the screens are automatically configured and dis‐
played.
10.2.2
User interface layout
The basic layout of the operating screens will be illustrated by the example of
the basic Automation screen.
Fig. 10-5:
Operating screen example – Automation screen
Machine status (1)
The topmost bar of all screens displays the current operating area (MA‐
CHINE), the NC operation mode (Continue), the diagnostic status ("red ar‐
row": error is present), the channel status (here: complete lock), the current
user status (lock), and the current channel number ($1).
Diagnostics (2)
The diagnostic bar shows the messages in plaintext scrolling across the
screen. It additionally displays the current date and time.
Working area (3)
The working area displays the current screen. In the example, this is the
basic Automation screen with axis position display, tool display, as well as
program and technology display.
Status bar (4)
The status bar shows status messages of the operating software. Additional‐
ly, the name of the current screen (Automation) is specified.
F-keys (5)
The function keys are provided for operating the current screen and opening
other operating screens of the current operating area.
M-keys (6)
The machine keys allow execution of control functions referring to the current
screen. In this case, it is possible to select the Automatic secondary mode
(Continuous or Single Block).
Bosch Rexroth AG
DOK-MTXMIC-EASY*******-CO06-EN-P
136/177
IndraMotion MTX micro Easy Setup for Standard Turning and Milling Machines
Operating the IndraMotion MTX micro
