Bosch Rexroth BTV 16 Project Planning Manual Download Page 11

Page: 11 / 110

BTV 16/40

System Presentation

1-5

DOK-SUPPL*-BTV16/40***-PR02-EN-P

BTV 40.1BH with Keypad and 16 M-Keys, Standard
Version (Rexroth Design)

BTV 40.1AH with Keypad and 16 M-Keys, Standard
Version (Rexroth Indramat Design)

IndraViewP40_AH.eps

Fig. 1-7:

BTV 40.1 with keypad

1.3 Operating

System

For license reasons IndraView P16 and IndraView P40 are only delivered
with already installed operating system.

The delivered operating systems may only be used in the industrial
environment. Use in the office area, e.g. on a secretary’s computer, is not
allowed.

1.4 Commissioning

Mount the device properly (for this, see chapter 5 "Dimensions"). Then,
connect the device to the power supply and, if required, to the network.

Summary of Contents for Rexroth BTV 16















































































































Search results

Summary of Contents for Rexroth BTV 16

Reviews:

Related manuals for Rexroth BTV 16

Brands by name

Popular brands

Bosch Rexroth BTV 16, Project Planning Manual

Search results

Summary of Contents for Rexroth BTV 16

Reviews:

Related manuals for Rexroth BTV 16

Brands by name

Popular brands