BTV 16/40
PC Box
7-9
DOK-SUPPL*-BTV16/40***-PR02-EN-P
Ethernet Interface
The operator terminal can be connected with an Ethernet network via an
Ethernet interface.
RJ45, female connector, 8-pin
Type:
Ethernet 10Base T / 100Base X
Cable length:
Max. 100 m
Cable type:
Shielded, 2-core, twisted
Transmission rate:
10 or 100 Mbits/s
Max. 100 m
1
8
2
1
3
4
5
6
7
8
Ethernet RJ45
To the network
Ethernet
ethernet_sst.eps
Fig. 7-10: Ethernet interface
The driver configuration of the network connection can be called up in the
task bar or in the "Control Panel" with icon "Network Board". Here you can
set among other values, if the data transfer shall occur with 10 Mbits/s
and/or with 100 Mbits/s.
Note:
Please observe that the network board of the outstation has to
be able to process the same data transmission rate.
VGA Interface
An external monitor (CRT) can be connected to the VGA connection and
can be operated parallel to the integrated flat screen via the integrated
video adapter.
•
Video RAM: Max. 8 MB
Note:
Please observe that the external monitor has to be already
connected during the booting process of the operator terminal,
as otherwise the VGA interface is not intialized by the BIOS.
Note:
Before plugging-in a graphic card the video adapter integrated
in BIOS has to be switched off.
Ethernet – Network Connection
VGA Connection of an External
Monitor
Summary of Contents for Rexroth BTV 16
