BTV 16/40
Maintenance and Installation
8-3
DOK-SUPPL*-BTV16/40***-PR02-EN-P
Rear view of
the display
Hard disk frame
Retaining screw
festplattentausch.eps
Fig. 8-1:
Position of the hard disk’s installation frame and the retaining screw
5. The new hard disk is delivered including the installation frame. The
new hard disk is always mounted with the installation frame in reverse
order as described above.
6. The new hard disk parameters are automatically recognized by the
system. If the operating system does not boot automatically after
switching on the operator terminal, interrupt the power supply for at
least 10 seconds and restart.
7. If there’s still no system available, check cable connections leading to
the hard disk and the interface connectors for tightness and verify, if
the power supply is ready for use.
8. After properly booting the PC the user data and the operating system
settings for the normal operating mode have to be restored.
8.3 LCD
Display
A fading backlight causes a progressive deterioration of the LCD display’s
readability, so that a backlight exchange is necessary. For further
information please contact the Bosch Rexroth Service.
Summary of Contents for Rexroth BTV 16
