Bosch DSA E Series, Installation Manual

Page: 8 / 150

8 en | Safety Precautions E2600 DSA E-Series iSCSI Disk Arrays
- | V2 | 2012.09 Installation Manual Bosch Security Systems
WARNING!
Risk of electrical shock
1 - Supply (Negative), Brown Wire, -48 VDC
2 - Return (Positive), Blue Wire
3 - Ground, Green/Yellow Wire
4 - DC Power Connector
This unit has more than one power source. To remove all power from the unit, all DC MAINS
must be disconnected by removing all power connectors (item 4 below) from the power
supplies.
WARNING!
Risk of bodily injury
Only move a populated cabinet with a forklift or adequate help from other persons. Attach the
stability foot before moving the cabinet. If you do not attach the stability foot, the cabinet
might become unstable, or it might fall. Always push the cabinet from the front to prevent it
from falling over.
A fully populated cabinet can weigh more than 636 kg (1420 lb). The cabinet is difficult to
move, even on a flat surface. If you must move the cabinet along an inclined surface, remove
the components from the top half of the cabinet, and make sure that you have adequate help.
WARNING!
Risk of bodily injury
A qualified service person is required to make the DC power connection according to NEC and
CEC guidelines.
WARNING!
Risk of bodily injury
An empty tray weighs approximately 56.7 kg (125 lb). Three persons are required to safely
move an empty tray. If the tray is populated with components, a mechanized lift is required to
safely move the tray.