70
en | Turning on the Power and Checking for Problems
E2600 DSA E-Series iSCSI Disk Arrays
- | V2 | 2012.09
Installation Manual
Bosch Security Systems
LEDs on the Power-Fan Canister
Figure 11.5
LEDs on the Power-Fan Canister
7
Host Interface
Card Link 6 Up
LED
Green
The Ethernet link has
auto-negotiated to 1 Gb/
s.
The Ethernet link is down
or does not auto-
negotiate to 1 Gb/s.
8
Host Interface
Card Link 6
Active LED
Green
The link is up (LED blinks
when there is activity).
The link is not active.
9
Expansion Fault
LED
Amber
At least one of the four
PHY is working, but
another PHY cannot
establish the same link to
the device connected to
the Expansion OUT
connector.
Normal status.
10
Expansion
Active LED
Green
At least one of the four
PHYs in the OUT
connector is working and
a link has been made to
the device connected to
the Expansion connector.
The link is not active.
* "LEDs on the Controller Canister Host Interface Card Subplates" shows the four-port iSCSI
host interface card (HIC), which can also be a four-port FC HIC or a two-port SAS HIC.
1
Standby Power LED
2
Power-Fan DC Power LED
3
Power-Fan Service Action Allowed LED
4
Power-Fan Service Action Required LED
5
Power-Fan AC Power LED
Table 11.6
LEDs on the Power-Fan Canister
Location
LED
Color
On
Off
1
Standby Power
Green
The controller-drive tray
is in Standby mode, and
DC power is not available.
The controller-drive
tray is not in Standby
mode, and DC power is
available.
2
Power-Fan DC
Power
Green
DC power from the
power-fan canister is
available.
DC power from the
power-fan canister is
not available.
Table 11.5
LEDs on the Controller Canister Host Interface Card Subplates*
Location
LED
Color
On
Off
Summary of Contents for DSA E Series
Page 1: ...E2600 DSA E Series iSCSI Disk Arrays en Installation Manual ...
Page 2: ......
Page 149: ......
