E2600 DSA E-Series iSCSI Disk Arrays
Connecting the E2600 Controller-Drive Tray to the Drive Trays | en
59
Bosch Security Systems
Installation Manual
- | V2 | 2012.09
9.
To each end of the cables, attach a label with this information:
–
The controller ID (for example, controller A)
–
The ESM ID (for example, ESM A)
–
The ESM connector (In or Out)
–
The drive tray ID
For example, if you are connecting controller A to the In connector on ESM A in drive tray
1, the label on the controller end of the cable will have this information:
CtA-Dch1, Dm1-ESM_A (left), In – Controller End
The label on the drive tray end of the cable will have this information:
Dm1-ESM_A (left), In, CtrlA
10. If you are installing the controller-drive tray with two controllers, repeat step 2 through
step 9 for the controller in slot B in the controller-drive tray.
NOTICE!
To connect cables for maximum redundancy, the cables attaching controller B must be
connected to the drive trays in the opposite tray order as for controller A. That is, the last
drive tray in the chain from controller A must be the first drive tray in the chain from controller
B.
Summary of Contents for DSA E Series
Page 1: ...E2600 DSA E Series iSCSI Disk Arrays en Installation Manual ...
Page 2: ......
Page 149: ......
