EN
| 59
Bosch Security Systems | 2006-05 | V2.0
Dinion IP
| Installation Manual
Alarm recording
You can specify the times during which images from the camera should be
recorded in the event of an alarm.
You can select up to 16 individual recording time intervals for each day of the
week. Alarm recording occurs only during the highlighted time intervals.
Note
If a time interval has already been selected for continuous recording, you
cannot select it for alarm recording (see “Continuous recording” on
page 58).
Caution
Alarm tracks must be set up in the required partition for alarm recording
(see “Number of alarm tracks” on page 61).
The unit uses a special recording mode during alarm recording for optimal usage
of storage capacity: as soon as a time gap for alarm recording begins, a recording
is continuously made on one segment, which is the size of a complete alarm
sequence (pre- and post-alarm time).
