EN
| 38
Bosch Security Systems | 2006-05 | V2.0
Dinion IP
| Installation Manual
Time server
The camera can receive the time signal from a time server using the time server
protocol (RFC 868) and then use it to set the internal clock. The device calls up
the time signal automatically every ten minutes.
Time zone
Select the time zone in which the system is located.
Time settings
Select this during daylight savings time if the time change is to be taken into
account. Deactivate the check box to switch to winter time.
Time server IP address
Enter the IP address of a time server working with the RFC 868 protocol.
Display Settings
Display stamping
Various overlays or stamps in the video image provide important supplementary
information. These overlays can be enabled individually and arranged on the
image in a clear manner.
Camera name stamping
This field sets the position of the camera name overlay. It can be displayed at the
Top, at the Bottom or at a position of your choice using the Custom option. Or it
can be set to Off if no overlay of this information is to be shown.
