Bosch Diniop IP - NWC-0455 Installation Manual Download

Page: 71 / 94

| 71

Bosch Security Systems | 2006-05 | V2.0

Dinion IP

| Installation Manual

• Standard (with JPEG): e-mail with JPEG image file attachment.

• SMS: e-mail in SMS format to an e-mail-to-SMS gateway (for example to send

an alarm by cellphone) without an image attachment.

Caution

When a cellphone is used as the receiver, make sure to activate the e-mail
or SMS function, depending on the format, so that these messages can be
received. You can obtain information on operating your cellphone from
your cellphone provider.

Attach JPEG from camera

Click the checkbox to select the cameras from which JPEG images are sent.
An enabled video input is indicated by a check mark.

Destination address

Enter the e-mail address for alarm e-mails here. The maximum address length is
49 characters.

Sender name

Enter a unique name for the e-mail sender, for example the location of the unit.
This will make it easier to identify the origin of the e-mail.

Send e-mail for testing

Test the e-mail function by clicking the Send now button. An alarm e-mail is
immediately created and sent.

Relay Settings

Here, you can make the settings for the alarm sources and alarm connections.

Summary of Contents for Diniop IP - NWC-0455































































































Search results

Summary of Contents for Diniop IP - NWC-0455

Reviews:

Related manuals for Diniop IP - NWC-0455

Brands by name

Popular brands

Bosch Diniop IP - NWC-0455, Installation Manual

Search results

Summary of Contents for Diniop IP - NWC-0455

Reviews:

Related manuals for Diniop IP - NWC-0455

Brands by name

Popular brands