70
en | Meeting application
DICENTIS
2021.06 | V3.7 |
Configuration manual
Bosch Security Systems B.V.
Image 2
I-picture interval 2
5 S
H264 profile 2
Main
Bit rate compression mode 2
VBR
Image quality 2
6
Maximum bit rate limit 2
Yes
Max kbps
2500
Stream
rtsp://<ip address>/video2
–
External video streams.
For specific video camera types see “System Overview” DICENTIS typical system setup.
i
Notice!
Ensure that the Bosch HD conference dome firmware 5.80 or higher. Configure the IP video
stream according to the following settings:
- H.264.
- Set the main frequency of the HD conference dome from 50Hz to 60Hz to reduce the latency
(Settings\Advanced mode\Camera\Installer Menu).
- 720p50 or 720p60.
- Target bit‑rate 2Mbit/s.
- Maximum bit-rate 2.5Mbit/s.
- GOP length 15 (also known as I-Frame distance).
- No B‑frames, I and P frames only.
–
Add
:
Click the plus (+) symbol to add a new camera. Onvif Profile-S compatible cameras
are automatically detected, but Panasonic and Sony cameras need to be added manually.
–
Enter the
IP address or host name
of the camera in the network. After saving the
camera settings, you can click the blue hyperlink in the camera overview screen to
access the camera website (allows for easy configuration of the camera).
–
Enter the
Camera user name
and
Camera user password
. The default username and
password for Sony was “admin” “admin” and for Panasonic “admin” “12345” at the
time this manual was written. As of software version 2.7, Onvif cameras with a
username and password are discovered automatically. If a username and password
has been configured for the camera, you have to enter this in the Meeting
Application.
–
Enter the
H.264 video stream
.
The H.264 image can be displayed on the MMD and in
the Meeting Application. In case the image only has to be displayed in the Meeting
Application, the camera’s H.264 stream can be used. If the stream also has to be
displayed on the MMD, it is recommended to use the Epiphan (external H.264)
encoder.
–
Select the
Control protocol
. <Panasonic> or <Sony>, for Panasonic or Sony cameras.
Select <Unknown> if you want to add an external video stream.
–
Delete
: Click the minus (-) symbol to delete cameras that are no longer connected.
Deleted cameras are also removed from the configuration file of the HD-SDI video
switcher, which makes it easier to maintain.
