DICENTIS
Meeting application | en
75
Bosch Security Systems B.V.
Configuration manual
2021.06 | V3.7 |
–
Power Off
: Allows the device to power off the system (DCNM-MMD2, Meeting
Application, Synoptic application, and API).
–
Volume Control
: Allows the device to control the master volume (DCNM-MMD2, Meeting
Application, and API).
5.4.9
Language selection
Here you can configure:
–
Which languages are available on the contribution devices
–
Language is displayed on contribution device as:
–
Original:
the original description of the language is displayed.
–
Number and abbreviation:
the number assigned to the language in
Languages
along
with its abbreviation are displayed.
–
Number and original:
the number and the original description of the language are
displayed.
–
Abbreviation:
the abbreviation for the language is displayed.
–
Skip unused (assigned) languages:
unused languages, displayed as
(---)
are skipped
on the devices of participants. For interpreters unused languages cannot be skipped,
as this would affect the order of the languages and the possibility to count the steps
while setting up their inputs using the rotary on the interpreter device.
–
Dante I/O Licenses:
Shows the number of Dante
TM
I/O licenses divided in:
–
Total
Dante I/O licenses
Shows the total number of Dante
TM
I/O licenses.
–
Dante inputs:
Shows the number of Dante
TM
licenses used for languages.
–
Dante remote desk inputs:
Shows the number of Dante
TM
licenses used for
languages coming from remote desks.
–
Send to Dante:
Shown the number of licenses used to send languages to Dante
TM
.
–
Unprocessed send to Dante:
Shows the number of licenses used to send
unprocessed languages to Dante
TM
.
–
Remaining
Dante I/O Licenses:
Shows the number of remaining Dante
TM
I/O
licenses.
i
Notice!
Some languages will not be available for participants and interpreters if the value of
Remaining Dante I/O Licenses is below 0.
–
Unprocessed language streams:
Check this box to enable extra options to create a
second stream for a language. This second stream can be used for external parties that
require an unprocessed audio stream. It also allows the possibility to configure the
Unprocessed
,
Headroom
,
Send to Dante
, and
Floor filling
options per language.
Note
: The DICENTIS system supports a maximum of 100 language streams. By enabling
this option, the number of languages changes from 100 to 50 to allow for the second
unprocessed stream per language.
i
Notice!
Unprocessed language streams can only be created for languages sourced by DICENTIS
Interpreter desks.
–
Languages:
Shows the available translated languages received from the Conference
system.
