BorMann 034469, Manual

Page: 14 / 31

EN
WWW.BORMANNTOOLS.COM
14
Adding oil
a. Place the engine on a level Surface.
b. Remove the dipstick and wipe it dean.
c. Add recommended oil to the upper limit.
Changing the oil
CAUTION: Change oil when the engine is warm from operation.
a. Place the machine on a level surface which is 300mm higher than the ground.
b. Remove the oil maintenance cover.
c. Place the waste oil box on the ground.
d. Remove the oil dipstick, and tilt the machine to pour the oil.
e. Add recommended oil to the upper limit.
f. Fully tighten the dipstick.
g. Properly dispose of any used oil at an approved waste management facility.
h. Reinstall the oil maintenance cover.
WARNING: The engine Is not filled with oil at the factory. Any operation before It has
been properly filled with the recommended type and amount of oil may result in engine
damage and void your warranty.
d. Fully tighten the dipstick.
e. Dispose of used oil at an approved waste management facility.
CAUTION: Oil level check
Reinstall dipstick into hole; rest on oil fill neck. DO NOT thread cap into hole.
f. Property dispose of any used oil at an approved waste management facility.