BorMann 034469, Manual

Page: 13 / 31

EN
WWW.BORMANNTOOLS.COM
13
Each time
before use
10 hours or the
first month
1
50 hours or
every three
months
2
100 hours or every six
months
2
300 hours or
every year
2
Engine oil Inspection •
Replacement • •
Air Filter Inspection •
Cleaning •
3
Spark plug Inspection and
adjustment
•
Replacement •
Spark
extinguisher
1
Cleaning •
Idle speed Inspection and
adjustment
•
4
Valve
Clearance
Inspection and
adjustment
•
4
Carbon
canister
1
Inspection
Every two years
4
Low permeability
oil tube
Inspection Every two years
4
Oil tube Inspection Every two years
4
Note 1: Applicable types (if available).
Note 2: Before each season and after then (whichever comes first).
Note 3: Service more frequently under severe, dusty, dirty conditions.
Note 4: To be performed by knowledgeable, experienced owners or the authorized dealer.
1. Maintenance schedule
Stop the generating set before serving, disconnect all electric devices and battery (if equipped), and cool down the generating set completely.
Serve the generating set in a clean, dry and flat area, so that no accident would happen during the serving. Please make the wheel in brake state to stop
accidental movement of generating set.
Follow the service intervals indicated in the chart below. Service your generating set more frequently when operating in adverse conditions.
Contact your local authorized service dealer for your generating set or engine maintenance needs.
2. Generating set maintenance
Use a damp doth to clean exterior surfaces of the generating set. Use a soft brush to clean the dirt and oil.
Use an compressed air (25 PSI) to clear dirt and debris from the generating set.
Inspect all air vents and cooling slots to ensure that they are clean and unobstructed.
WARNING: DO NOT use water to clean the generating set Water can enter the generating set through the cooling slots and damage the generating set wind -
ings.
WARNING: DO NOT modify the generating set in any way.
DO NOT tamper with modified the speed regulator.
Generating set supplies correct rated frequency and voltage when running at factory set
Tampering with modify the factory set governor will void your warranty.
3. Engine maintenance
Engine oil
Only use four-stroke engine oil of ''SJ'', ''SL'' or equivalent level which are in accordance with or higher than API
standard.
Check the API label on oil bottle or other container, and make sure the "SJ, SL" or equivalent level letter is in the
label.
SAE 10W-30 is recommended for general, all-temperature use.
Other viscosities shown in the chart may be used when the average temperature in your area is within the
indicated range.
Ambient Temperature