![background image](http://html1.mh-extra.com/html/boretti/ml9015ifsan/ml9015ifsan_user-manual-installation-advice_2788322056.webp)
56
To fix the sliding shelf supports onto the side racks
*
Screw the side racks onto the oven wall (and the catalytic liners if supplied -
fig. 6.1).
*
Fit the sliding shelf supports onto the top wire of a rack and press (fig. 6.7a).
You will hear a click as the safety locks clip over the wire.
Important note:
When cooking with the rotisserie DO NOT position the grill tray on the
sliding shelf supports.
To remove the telescopic sliding shelf supports:
*
Remove the side racks (and the catalytic liners if supplied) by unscrewing
the fixing screws (fig. 6.1).
*
Lay down the sliding shelf support and side racks, with the telescopic
sliding shelf support underneath.
*
Find the safety locks. These are the tabs that clip over the wire of the side
rack (arrow “
1
” in fig. 6.7b).
*
Pull the safety locks away from the wire to release the wire (arrow “
2
” in
fig. 6.7b).
Cleaning the sliding shelf supports:
*
Wipe the supports with a damp cloth and a mild detergent only.
*
Do not wash them in the dishwasher, immerse them in soapy water, or use
oven cleaner on them.
1
2
1
Fig. 6.7a
Fig. 6.7b
EN
Bor
etti Milano / User guide - Installation advice