![background image](http://html1.mh-extra.com/html/boretti/ml9015ifsan/ml9015ifsan_user-manual-installation-advice_2788322055.webp)
55
6.5
Fig.
Fig. 6.5a
6.5b
Fig.
Replacing the drawers
1. Insert the drawer guides into the range guides (fig. 6.6).
2. Gently close the drawer completely; the safety catches will automatically
hook into place.
Fig. 6.6
Telescopic sliding shelf supports
The telescopic sliding shelf supports make it safer and easier to insert
and remove the oven shelves and trays. They stop when they are pulled
out to the maximum position.
Important!
When fitting the sliding shelf supports, make sure that you fit:
*
The slides to the top wire of a rack. They do not fit on the lower wire.
*
The slides so that they run out towards the oven door.
*
Both sides of each pair of shelf slides.
*
Both sides on the same level.
EN
Bor
etti Milano / User guide - Installation advice