![background image](http://html1.mh-extra.com/html/boretti/ml9015ifsan/ml9015ifsan_user-manual-installation-advice_2788322052.webp)
52
Important:
DO NOT use chlorine-based or acid-based cleaning products, abrasive
products or non-neutral detergents as they may cause irreparable
damage to the surface. DO NOT spray cleaning liquids directly on the
programmer display.
Oven fitting out
Fit the catalytic panel to the side rack
*
Ensure the panels are placed the correct way around (with the arrow up
fig. 6.1): the cutout fits over the light and the hole for the fixing screw goes
to the front of the oven.
*
Assemble the wire racks to the oven walls using the 2 screws (fig. 6.1).
*
Slide in, on the guides, the shelf and the tray (fig. 6.2).
The shelf must be fitted so that the safety notch, which stops it sliding out,
faces the inside of the oven; the guard rail shall be at the back.
*
To dismantle, operate in reverse order.
HOLE FOR SIDE LIGHT
Fig. 6.1
Guard rail
Stop notch
Fig. 6.2
EN
Bor
etti Milano / User guide - Installation advice