11
Fitting the adjustable feet
The adjustable feet must be
fitted to the base of the cooker
before use (fig. 1.2). Rest the rear
of the cooker on a piece of the
polystyrene packaging exposing
the base for the fitting of the feet.
Fit the 4 legs by screwing them
tight into the support base as
shown in figure 1.3.
Fig
. 1.2
Levelling the cooker
The cooker may be levelled by screwing the lower ends of the feet IN or
OUT (fig. 1.4).
Fig
. 1.4
Fig
. 1.3
Backguard
Before installing the cooker,
assemble the backguard “
C
”
(fig. 1.5).
*
The backguard “
C
” can be found
packed at the rear of the cooker.
*
Before assembling remove any
protective film/adhesive tape.
*
Remove the two spacers “
A
” and
the screw “
B
” from the rear of the
cooktop.
*
Assemble the backguard as
shown in figure 1.5 and fix it by
screwing the central screw “
B
”
and the spacers “
A
”.
C
B
A
Fig
. 1.5
EN
Bor
etti Milano / User guide - Installation advice