22
Induction cooking system
When your induction hob is switched on and a cooking zone has
been selected, the electronic circuits produce induced currents that
instantaneously heat the bottom of the pan which then transfers this heat
to the food. Cooking takes place with hardly any energy loss between the
induction hob and the food. Your induction hob operates only if a correct
pan with the right features is placed on a cooking zone. Please refer to
COOKWARE/COFFEE POT FOR INDUCTION COOKING.
If the pan detection symbol appears on the display, your pan is not suitable
and your induction hob will not operate After 10 minutes without detecting any
pan, the cooking zone switches Off automatically and can only be switched On
after the control knob has been returned into “
0
” (Off) setting.
Remaining heat indicators
When the temperature of a cooking zone is still hot, the relevant remaining
heat indicator lights up on the display to alert you of the hot surface. Avoid
touching the hob surface over the cooking area. Please pay special attention
to children. When the is lit on the display, it is still possible to start cooking
again; just turn the control knob to the required power level.
Cookware/coffee pot for induction cooking
The induction cooking system OPERATES ONLY if using correct cookware
suitable for induction cooking (normally identified by an induction symbol
on the bottom of the cookware/ coffee pot). The use of not suitable
cookware may cause damage to the appliance.
The bottom of the pan/coffee pot has to be ferromagnetic to generate
the electromagnetic field necessary for the heating process (meaning a
magnet has to stick to the bottom of the pan/coffee pot).
Pans/coffee pots made from the following materials are not suitable:
*
glass, wood, porcelain, ceramic, stoneware;
*
pure stainless steel, aluminium or copper without magnetic bottom.
To check if a pan/coffee pot is suitable or not:
*
Test the bottom of the pan/coffee pot with a magnet: if the magnet sticks,
the pan issuitable.
*
if a magnet is not available pour a small amount of water inside the pan/
coffee andplace the pan on a cooking zone. Switch on the cooking zone: if
the symbol (pandetection) appears on the cooking zone display (instead
of the power level), the pan/coffee is not suitable.
EN
Bor
etti Milano / User guide - Installation advice