52
Assembly practico comfort (Model with moving along side
rails rails):
1. Take off the mattress from the lying surface
2. Remove bolts from the foot end and pull out the
extension
3. Insert the closing element incl. the side panneling of the
frame extension and fasten them.
4. Fasten the foot end panel
6.3 Assembly- Accessories
The following standard equipment can be combined with the
bed models:
Side rail attachment (Fig. 1)
Scope of delivery: side rail attachment, completly mounted
– Open the plastic cap, plug in the side rail attachment,
position it into the middle and close the cap. Please make
sure, that the release button of the side rail extension
faces outwards.
Important note:
The bock side rail extension has been designed for the use on
all bock wooden side rail models. Company Bock assumes no
liability for damages arising from the use in combination with
third-party products
Lifting pole with triangle grip, 6,5 kg (Fig. 2)
The safe capacity of the lifting pole amount to max. 75 kg.
Scope of delivery: 1 lifting pole 1 triangle grip
– Insert the lifting pole into the provided connector on the
head end of the lying surface.
– The height adjustable area of the triangle grip is not allo-
wed to fall below <= 550 mm up >= 700 mm, meassured
from top of the mattress (mattress height 100mm and
120 mm) to the buttom line of the horizontal grip.
ATTENTION: Do not swing the lifting pole outside of the lying
surface.
Under normal use the triangle grip has a durability of at least five
years. We refer to the safety, technical tests.
Side rail bumpers, 1.4 kg (Fig. 3)
Scope of delivery: 1 cover 1 bumper
– Open the zipper of the bumper and slip it over the side
rail and close the zipper or velcro again
* Bock Hazard Note
The bedside use of accesso-
ries or medically necessary
appliances, e.g. I.V.poles
requires the nursing
person´s careful attenti-
on with regard to the avo-
idance of crush and shear
zones to the care recipient
when adjusting the back or
leg rests.
Fig. 1
Fig. 2
Fig. 3