32
5.4 verona / verona low
verona and verona low have been especially designed to meet
the requirements of daily use in rehabilitation- and medical faci-
lities or for home care. Their purpose is to provide care-depen-
dent, invalid and disabled persons with an especially home-like,
comfortable environment, as well as to facilitate the care pro-
cess.
> verona and verona low are not suitable for the use in
hospitals.
> verona and verona low are not suitable for the transport
of patients. The beds are simply defined for the moving
inside the patient´s room, e.g. for cleaning or access to
the patient.
> verona and verona low are suitable for persons up from
twelve years and a body height of 150 cm.
> Under certain circumstances,verona and veronal low
can (if required) be used in combination with medical
purposes and other electrical medical devices (e.g. drai-
ning devices, ultrasound nebulizers, nutrition systems,
anti-decubitus systems, oxygen concentrators, etc.). In
this case, it would be necessary, to deactivate all bed
functions by means of the integrated locking device, until
the treatment is completed.
Important: The beds are not equipped with any particular con-
nections that provide for a potential equalization. Electrical medi-
cal devices connected to the patient´s intravascular or intracar-
diac system must not be used. The operator of the medical
device shall be responsible for the conformity of the combinati-
on of the devices with the requirements of DIN EN 60601-1-1.
Particular features verona and verona low stand out for their
advanced technology
* Bock Hazard Note
The side panneling of the
lying surface frame are
essential for the correct
side rail distance.
The beds are not to be
operated without the side
panneling.
This is not valid for bed
models with lower instal-
led end panels and a corre-
sponsding deeper side rail
bar.