42
Mounting of the splitted telescopic side rails
With this side rail version, the end panels should not the
asssembled completely. Both end panels should only be
brought into place but not be fastened with the screws.
Take the side panneling of the lying surface frame and
screw it to the provided drilling holes (Fig. 1).
Push the U-profile of the telescopic middle bar onto the
frame. The holes of the middle bar and the lying surface
frame have to be on top of each other. Fasten the provi-
ded screws from above (Fig. 2).
Fig. 1
Fig. 2
Fig. 3
Take the side rail bars and hook them on the metal guides
on each side. Ensure to follow the labeling with top and
button side rails on the side rail end caps.
When the side rails are in the correct position assembly
the end panels correctly and fasten them. The side rails
are now ready for use (Fig. 3).
After the assembly of the bed or before using it, the lying
surface should be adjusted, in order to check the correct
position of the cables. The adjustment area has to be
without obstacles.
The net cable has to be placed outside of the bed and the
hand control must be accessable.
Your nursing care bed is now ready for use!