37
Fig. 8
9. Afterwards fix it with the provided bolts and secure with
the protection sheet (Fig. 9).
10. The net cable has to be fastened to the lying surface with
the provided pull relief (Fig. 10).
11. Connect the actuator accordingly to the main motor
underneath the lying surface.
12. After the assembly, resp. before the operation of the
bed, adjust the lying surface by the hand control, in order
to controll the ideal positioning of the cable. The adjust-
ment area has to be without obstacles and the hand
control has to be accessable.
Further mounting steps as decribed in chapter 5.7.
Fig. 9
Fig. 10
Fig. 11
Fig. 12