BMW Z4 Owner'S Manual Download Page 324

Page: 324 / 330

Standby state, idle state and drive-ready

state

Start/stop, automatic function

113

Start/Stop button

113

Starting aid terminals

298

Starting, see Drive-ready state

Starting the engine, see Drive-ready state

Stationary climate control via Remote Engine

Start

217

Stations, AM/FM, see Owner's Handbook for

Navigation, Entertainment, Communication

Status control display, tires

267

Status information, iDrive

Status of Owner's Manual

Status, vehicle

143

Steering wheel, adjusting

106

Steering wheel, buttons

Steering wheel, see Memory function

107

Steptronic Sport transmission, see Steptronic

transmission

123

Steptronic transmission

123

Storage compartment, cargo area

233

Storage compartment, center console

228

Storage compartments

227

Storage compartments, locations

Storing the vehicle

Straps for cargo, see Lashing eyes in the cargo

area

232

Suitable devices

Suitable mobile phones

Summer tires, tread

257

Sun visor

223

Supplementary Owner's Manuals

Supplementary SMS text message

133

Suspension settings, see Driving Dynamics Con‐

trol

127

Switches, see Cockpit

Switch for driving dynamics, see Driving Dynam‐

ics Control

127

Switching off the engine, see Drive-ready

state

Symbols and displays

SYNC program, automatic climate control

214

Tachometer

136

Tail lights, replacing, see Lights and bulbs

293

Technical changes, see For Your Own Safety

Technical data

310

Telephone, see Owner's Manual for Navigation,

Entertainment and Communication

Teleservices, see Owner's Handbook for Naviga‐

tion, Entertainment, Communication

Television, TV, see Owner's Handbook for Navi‐

gation, Entertainment, Communication

Temperature, automatic climate con‐

trol

207

211

Temperature display, see External tempera‐

ture

137

Temperature, engine oil

136

Tensioning straps, cargo area

232

Theft alarm system, see Alarm system

Thigh support, sport seat

101

Through-loading system

233

Tilt alarm sensor

Tilt, backrest

101

Tilting, passenger's side mirror, see Automatic

Curb Monitor

105

Time

Tire brands, recommended

259

Tire damage

257

Tire identification marks

256

Tire inflation pressure

252

Tire inflation pressure monitor, see FTM Flat

Tire Monitor

272

Tire pressure

252

Tire Pressure Monitor TPM

265

Tire repair kit, see Mobility System

Tire sealant, see Mobility System

Tires, run-flat

Tire tread

Tone, see Owner's Manual for Navigation, Enter‐

tainment and Communication

Tool

292

Torque display, see Sport displays

142

Total vehicle weight

311

Seite 324

REFERENCE

Everything from A to Z

324

Online Edition for Part no. 01402779113 - II/19

Summary of Contents for Z4











































































































































































































































































































































Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands

BMW Z4, Owner'S Manual

Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands