BMW Z4, Owner'S Manual

Page: 148 / 330

3. "Exterior lighting"
4. Select the desired setting:
▷ "MGU-416756"
When unlocking the vehicle, individual
light functions are switched on for a lim‐
ited time.
Headlight courtesy delay
feature
General information
The low beams stay lit for a certain time if the
high beams are switched on after standby state
is switched on.
Setting the duration
Via iDrive:
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "Pathway lighting"
5. Select the desired setting.
Daytime running lights
General information
The daytime running lights light up when drive-
ready state is switched on.
Activating/deactivating
In some countries, daytime running lights are
mandatory, so it may not be possible to deacti‐
vate the daytime running lights.
Via iDrive:
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "Daytime driving lights"
The setting is stored for the driver profile cur‐
rently used.
Adaptive light functions
Concept
Adaptive light functions enable dynamic illumina‐
tion of the roadway.
General information
The adaptive light functions may consist of one
system or multiple systems, depending on the
equipment version:
▷ Cornering light, refer to page 148 .
Activating
Press the button on the light switch ele‐
ment.
The LED in the button lights up.
The adaptive light functions are active when the
drive-ready state is switched on.
Cornering light
In tight curves, for instance on mountainous
roads or when turning, an additional, cornering
light is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain speed.
The cornering light is automatically switched on
depending on the steering angle or, where appli‐
cable, the use of turn signals.
When driving in reverse, the cornering lights may
be automatically switched on regardless of the
steering angle.
Seite 148
CONTROLS
Lights
148
Online Edition for Part no. 01402779113 - II/19