BMW Z4 Owner'S Manual Download Page 136

Page: 136 / 330

Indicator light in the instrument

cluster

The yellow indicator light illuminates,
once the fuel reserve is reached.

Tachometer

Always avoid engine speeds in the red warning
field. In this range, the fuel supply is reduced to
protect the engine.

Shift point indicator

Concept

The shift lights indicate the upshift point at which
the best possible acceleration can be achieved.

Functional requirement

Shift lights are shown when the SPORT or
SPORT PLUS driving program is activated.

Switching on/off

Select SPORT or SPORT PLUS driving
mode.
Press Driving Dynamics Control.

Activate the M/S manual mode of the trans‐
mission.

Display

▷

Current engine speed is displayed in the
tachometer.

▷

Arrow 1: successive yellow illuminated fields
indicate an increase in the speed.

▷

Arrow 2: successive orange illuminated fields
indicate the upcoming shift moment.

▷

Arrow 3: the field lights up red. Do not wait
any further to shift.

When the maximum speed is reached, the entire
display flashes red and the supply of fuel is inter‐
rupted in order to protect the engine.

Standby state and drive-

ready state

The letters OFF in the tachome‐
ter indicate that drive-ready state
is switched off and standby state
is switched on.

The letters READY in the tach‐
ometer indicate that the Auto
Start/Stop function is ready to
start the engine automatically.

For further information, see Idle state, standby
state, and drive-ready state, refer to page

Engine temperature

Display

▷

Cold engine: the pointer is at
the low temperature end.
Drive at moderate engine and
vehicle speeds.

▷

Normal operating tempera‐
ture: the pointer is in the mid‐
dle or in the lower half of the
temperature display.

▷

Hot engine: the pointer is at the high end of
the temperature range. In addition, a Check
Control message is displayed.

Seite 136

CONTROLS

Displays

136

Online Edition for Part no. 01402779113 - II/19

Summary of Contents for Z4











































































































































































































































































































































Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands

BMW Z4, Owner'S Manual

Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands