BMW Z4, Owner'S Manual

Page: 87 / 330

Selecting recognition
The settings for the recognition are entered on
the Welcome screen or via iDrive:
1. "CAR"
2. "Driver profiles"
3. Move the Controller to the right.
4. "Driver recognition"
5. Select the desired setting:
▷ "with vehicle key"
A remote control is assigned to the driver
profile. As soon as the vehicle detects the
remote control, the corresponding driver
profile will be activated.
If the remote control is not carried with
you or the remote control is not recog‐
nized, the driver profile can only be se‐
lected on the Welcome screen when the
PIN protection has been set up.
▷ "with Digital key"
A digital key is assigned to the driver pro‐
file. As soon as the vehicle recognizes the
digital key, the corresponding driver pro‐
file will be activated.
If the smartphone with the digital key is
not carried with you or the digital key is
not recognized, the driver profile can only
be selected on the Welcome screen when
the PIN protection has been set up.
6. "Activate linkage"
Setting up PIN protection
A driver profile without recognition and without
PIN protection can be activated and changed by
any driver.
A driver profile with recognition cannot be acti‐
vated without remote control and without digital
key if the PIN protection was not set up.
Non-ConnectedDrive countries: If PIN protection
was not set up or the PIN is not known, the driv‐
er's profile cannot be activated.
ConnectedDrive countries: If PIN protection was
not set up or the PIN is not known, the driver's
profile can be activated with the access data of
the corresponding ConnectedDrive account.
Via iDrive:
1. "CAR"
2. "Driver profiles"
3. "Driver recognition"
4. "using PIN"
Changing/canceling the
recognition function
If the vehicle and remote control will be handed
over for maintenance, for instance, the recogni‐
tion function should be canceled with the remote
control. The handed over remote control can
then no longer be used to access the personal
driver profile. If the driver profile was protected
with a PIN, undesired access will no longer be
possible.
If another remote control or another digital key is
assigned to a driver profile, the current assign‐
ment must be canceled first.
Via iDrive:
1. "CAR"
2. "Driver profiles"
3. "Driver recognition"
4. "with vehicle key"
or
"with Digital key"
5. "Activate linkage"
Selecting a driver profile
Depending on the recognition setting, the driver
profile will be selected automatically.
If the guest profile is active, the driver profile will
be selected on the Welcome screen or via iDrive:
1. "CAR"
2. "Driver profiles"
Seite 87
Opening and closing
CONTROLS
87
Online Edition for Part no. 01402779113 - II/19