BMW Z4, Owner'S Manual

Page: 111 / 330

Child seat security
The safety belt on the passenger's side can be
locked to fasten child restraint systems.
Locking the safety belt
1. Pull out the belt strap completely.
2. Secure the child restraint system with the
safety belt.
3. Allow the belt strap to be pulled in and pull it
tight against the child restraint system. The
safety belt is locked.
Unlocking the safety belt
1. Unbuckle the safety belt buckle.
2. Remove the child restraint system.
3. Allow the belt strap to be pulled in com‐
pletely.
Child restraint systems
with tether strap
Safety information
Warning
If the upper retaining strap is incorrectly used
for the child restraint system, the protective ef‐
fect can be reduced. There is a risk of injury.
Make sure that the upper retaining strap does
not run over sharp edges and is not twisted as
it passes the upper anchor.
NOTICE
The anchors for the upper retaining straps of
child restraint systems are only provided for
these retaining straps. When other objects are
mounted, the anchors can be damaged. There
is a risk of damage to property. Only mount
child restraint systems to the upper anchors.
Anchors
Symbol Meaning
The respective symbol shows
the anchor for the upper retain‐
ing strap. Seats with an upper
top tether are marked with this
symbol. It can be found on the
rear seat backrest or the rear
window shelf.
Routing the retaining strap
1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Anchor/eye
5 Vehicle floor
6 Fit
7 Upper retaining strap
Seite 111
Transporting children safely
CONTROLS
111
Online Edition for Part no. 01402779113 - II/19