BMW Z4, Owner'S Manual

Page: 32 / 330

With tires that cannot be found in the tire pres‐
sure values on the Control Display, reset the Tire
Pressure Monitor TPM.
Checking the tire inflation pressure
Regularly check the tire inflation pressure and
correct it as needed:
▷ At least twice a month.
▷ Before embarking on an extended trip.
Cleaning the wheels
The friction during hard braking may produce
brake dust and make the rims dirty. Brake dust
can be removed by cleaning the rims. BMW rec‐
ommends using vehicle care and cleaning prod‐
ucts from BMW.
Electronic oil measurement
Functional requirements
A current measured value is available after ap‐
prox. 30 minutes of normal driving.
Displaying the engine oil level
Via iDrive:
1. "CAR"
2. "Vehicle status"
3. "Engine oil level"
Different messages appear on the Control Dis‐
play depending on the engine oil level. Pay atten‐
tion to these messages.
Adding engine oil
General information
Safely park the vehicle and switch off drive-ready
state before adding engine oil.
Adding
Only add engine oil when the message is dis‐
played in the instrument cluster.
Observe the quantity to be added in the mes‐
sage.
Take care not to add too much engine oil.
Observe recommended engine oil types.
Providing assistance
Hazard warning flashers
The button is located in the center console.
Breakdown assistance
BMW Roadside Assistance
Via iDrive:
1. "COM"
2. "BMW Assist"
3. If necessary, "BMW Roadside Assistance"
A voice connection is established.
Seite 32
QUICK REFERENCE
On the road
32
Online Edition for Part no. 01402779113 - II/19