BMW Z4 Owner'S Manual Download Page 103 | Manualshive

Page: 103 / 330

background image

Warning

The efficacy of safety gear, including safety
belts, may not be fully functional or fail in the
following situations:

▷ The safety belts or safety belt buckles are

damaged, soiled, or changed in any other
way.

▷ Belt tensioners or belt retractors were

modified.

Safety belts can be imperceptibly damaged in
the event of an accident. There is a risk of inju‐
ries or danger to life. Do not modify safety belts,
safety belt buckles, belt tensioners, belt retrac‐
tors or belt anchors and keep them clean. Have
the safety belts checked after an accident at
the dealer’s service center or another qualified
service center or repair shop.

Correct use of safety belts

▷

Insert the safety belt into the belt guide.

▷

Wear the safety belt twist-free and tight to
your body over your lap and shoulders.

▷

Wear the safety belt deep on your hips over
your lap. The safety belt may not press on
your stomach.

▷

Do not rub the safety belt against sharp
edges, or guide it or jam it in across hard or
fragile objects.

▷

Avoid thick clothing.

▷

Re-tighten the safety belt frequently upward
around your upper body.

Buckling the safety belt

1.

Guide the safety belt slowly over shoulder
and hip to put it on.

2.

Insert the tongue plate into the safety belt
buckle. The safety belt buckle must engage
audibly.

Unbuckling the safety belt

1.

Hold the safety belt firmly.

2.

Press the red button in the safety belt buckle.

3.

Guide the safety belt back into its roll-up
mechanism.

Belt guide

When buckling safety belts, make sure the belt
guide is closed.
The magnet may open if the seat position has
been changed.

Safety belt reminder for driver's

seat and front passenger seat

Display in the instrument cluster

The indicator light lights up and a signal
sounds. Make sure that the safety belts
are positioned correctly. The safety belt

Seite 103

Seats, mirrors, and steering wheel

CONTROLS

103

Online Edition for Part no. 01402779113 - II/19

«
...
101
102
103
104
105
...
»

Summary of Contents for Z4











































































































































































































































































































































Reviews:

No comments

Related manuals for Z4

Brand: Jeep Pages: 212

Gemineye EC2014-C

Brand: Ecco Pages: 10

Reflex 5500 Series

Brand: Ecco Pages: 12

Brand: Warrior Winches Pages: 17

Brand: Calix Pages: 5

Automotive 31006

Brand: KRAFTWERK Pages: 2

Brand: Würth Pages: 36

Brand: Jeep Pages: 16

Brand: Audi Pages: 4

Brand: Flash Cover Pages: 2

Brand: Porsche Pages: 98

Brand: Bestop Pages: 5

Brand: PowerMadd Pages: 3

Brand: Cadillac Pages: 352

Brand: Softride Pages: 4

Brand: Ford Pages: 40

Brand: Mercedes-Benz Pages: 493

Brand: SpeedTech Lights Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands