BMW Z4 Owner'S Manual Download Page 30

Page: 30 / 330

▷

Switching off: press the lever down until it
reaches its standard position.

▷

Brief wipe: press the lever down from the
standard position.

Rain sensor

Activating/deactivating

To activate: press the lever up once from its
standard position, arrow 1.
To deactivate: press the lever back into the
standard position.

Adjusting the sensitivity

Turn the thumbwheel on the wiper lever.

Cleaning the windshield

Pull the wiper lever towards you.

Climate control

Automatic climate control

Button

Function

Temperature.

Recirculated-air mode.

Maximum cooling.

AUTO program.

Air distribution, manual.

Switching off.

Defrost and defog the wind‐
shield.

Rear window defroster.

Seat heating.

Climate control operation.

Air flow, manual.

Seite 30

QUICK REFERENCE

On the road

Online Edition for Part no. 01402779113 - II/19

Summary of Contents for Z4











































































































































































































































































































































Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands

BMW Z4, Owner'S Manual

Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands