BMW Z4, Owner'S Manual

Page: 43 / 330

Warning
An unsecured vehicle can begin to move and
possibly roll away. There is a risk of accident.
Before exiting, secure the vehicle against roll‐
ing.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
▷ Set the parking brake.
▷ On uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.
▷ On uphill grades or on a downhill slope,
also secure the vehicle, for instance with a
wheel chock.
NOTICE
In the case of repeated starting attempts or re‐
peated starting in quick succession, the fuel is
not burned or is inadequately burned. The cata‐
lytic converter can overheat. There is a risk of
damage to property. Avoid repeated starting in
quick succession.
Switching on drive-ready state
Concept
Drive-ready state is switched on
via the Start/Stop button:
Steptronic transmission
1. Depress the brake pedal.
2. Press the Start/Stop button.
The ignition is activated automatically for a brief
time and is stopped as soon as the engine starts.
Most of the indicator/warning lights in the instru‐
ment cluster light up for a varied length of time.
Gasoline engine
Depending on the motorization, the full drive
power may not be available for approximately
30 seconds after starting the engine. In this case,
the vehicle will not accelerate as usual.
Display in the instrument cluster
When drive-ready state is switched on, the tach‐
ometer shows the current engine speed.
Switching off drive-ready state
Steptronic transmission
1. Engage selector lever position P with the ve‐
hicle stopped.
2. Press the Start/Stop button.
The engine is switched off. The vehicle
switches into standby state.
3. Set the parking brake.
Seite 43
Operating state of the vehicle
CONTROLS
43
Online Edition for Part no. 01402779113 - II/19