BMW Z4 Owner'S Manual Download Page 101

Page: 101 / 330

Overview

Forward/backward, height, seat tilt

Backrest tilt

Backrest width

Lumbar support

Forward/backward

Push switch forward or backward.

Height

Push switch up or down.

Seat tilt

Move switch up or down.

Backrest tilt

Move switch forward or backward.

Thigh support

Pull the lever at the front of the seat and push
the thigh support forward or back.

Lumbar support

Concept

The curvature of the seat backrest can be ad‐
justed in a way that it supports the lumbar region

Seite 101

Seats, mirrors, and steering wheel

CONTROLS

101

Online Edition for Part no. 01402779113 - II/19

Summary of Contents for Z4











































































































































































































































































































































Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands

BMW Z4, Owner'S Manual

Search results

Summary of Contents for Z4

Reviews:

Related manuals for Z4

Brands by name

Popular brands